Home
Documentation
Resources
Partners
Community

Partners

Discover our program for agencies or developers that offer integration services and sellers who want to hire them.

Community

Get the latest news, ask others for help and share your knowledge.

How to Integrate 3DS with Checkout API - Checkout API - Mercado Pago Developers

Intelligent search powered by OpenAI 

How to integrate 3DS with Checkout Transparente

In this documentation you will find all the necessary information to carry out the integration with 3DS with Checkout Transparente . For more information on how this type of authentication works, see 3DS 2.0.

Important
To integrate with 3DS, certain requirements must be met. Before moving on to the next steps, review the Prerequisites section and make sure that all are met.

Integrate with 3DS

3DS authentication can be done through two different flows: with or without Challenge, which are additional steps that the buyer must complete to ensure their identity. The decision to include or exclude the Challenge depends on the card issuer and the risk profile of the transaction being performed.

Also learn about the integrations via Checkout Bricks, a modular, secure and customizable payment method that automates several of the processes described below.

For low-risk transactions, the information sent at checkout is sufficient and the additional Challenge steps are not necessary. However, for cases of high fraud risk, the Challenge is necessary to verify the buyer's identity, which increases card transaction conversion.

Below are the steps to integrate with 3DS.

  1. Use the Mercado Pago SDK JS at checkout to generate the credit card token.
  2. Next, send the checkout data along with the card token to the backend.
  3. After that, make a request to create a new payment with the received data. The three_d_secure_mode attribute needs to be sent with one of the following values:
    1. not_supported: 3DS must not be used (this is the default value).
    2. optional: 3DS may or may not be required, depending on the risk profile of the transaction.
    3. mandatory: 3DS will be required mandatorily.
Important
We recommend using the optional value in the implementation of 3DS, as it balances security and transaction approval. The mandatoryshould be used only for integrations that require all approved transactions to go through 3DS.

The payment capture must be automatic (capture=true), and the transaction should be created with binary mode deactivated (binary mode=false), as it might remain pending while waiting for the buyer to complete the Challenge.
          
<?php
  use MercadoPago\Client\Payment\PaymentClient;
  MercadoPagoConfig::setAccessToken("YOUR_ACCESS_TOKEN");

  $client = new PaymentClient();
  $request_options = new RequestOptions();
  $request_options->setCustomHeaders(["X-Idempotency-Key: <SOME_UNIQUE_VALUE>"]);

  $payment = $client->create([
    "transaction_amount" => <TRANSACTION_AMOUNT>,
    "token" => "CARD_TOKEN",
    "description" => "<DESCRIPTION>",
    "installments" => <INSTALLMENTS_NUMBER>,
    "payment_method_id" => "<PAYMENT_METHOD_ID>",
    "issuer_id" => "<ISSUER_ID>",
    "payer" => [
      "email" => $_POST['email']
    ],
    "three_d_secure_mode" => "optional"
  ], $request_options);
  echo implode($payment);
?>

        
          
MercadoPagoConfig.setAccessToken("<ENV_ACCESS_TOKEN>");
    PaymentClient client = new PaymentClient();
    PaymentCreateRequest createRequest =
        PaymentCreateRequest.builder()
            .transactionAmount(new BigDecimal(<TRANSACTION_AMOUNT>))
            .token("<CARD_TOKEN>")
            .description("<DESCRIPTION>")
            .installments(<INSTALLLMENTS_NUMBER>)
            .paymentMethodId("<PAYMENT_METHOD_ID>")
            .payer(
               PaymentPayerRequest.builder()
                 .email("<BUYER_EMAIL>")
                 .build()
            )
            .threeDSecureMode("optional")
            .build();
    client.create(createRequest);

        
          
using MercadoPago.Config;
using MercadoPago.Client.Payment;
using MercadoPago.Resource.Payment;
MercadoPagoConfig.AccessToken = "<ENV_ACCESS_TOKEN>";
var request = new PaymentCreateRequest
{
    TransactionAmount = <TRANSACTION_AMOUNT>,
    Token = "<CARD_TOKEN>",
    Description = "<DESCRIPTION>",
    Installments = <INSTALLLMENTS_NUMBER>,
    Payer = new PaymentPayerRequest
    {
        Email = "<BUYER_EMAIL>",
    },
    ThreeDSecureMode = "optional",
};
var client = new PaymentClient();
Payment payment = await client.CreateAsync(request);

        
          
import { MercadoPagoConfig, Payment } from 'mercadopago';

const client = new MercadoPagoConfig({ accessToken: '<ENV_ACCESS_TOKEN>' });
const payment = new Payment(client);

const body = {
  transaction_amount: <TRANSACTION_AMOUNT>,
  token: '<CARD_TOKEN>',
  description:  '<DESCRIPTION>',
  installments: <INSTALLMENTS_NUMBER>,
  payment_method_id: '<PAYMENT_METHOD_ID>',
  issuer_id: '<ISSUER_ID>',
  payer: {
    email: '<BUYER_EMAIL>',
  },
  three_d_secure_mode: 'optional'
}
payment.create({ body: body, requestOptions: { idempotencyKey: '<SOME_UNIQUE_VALUE>' } }).then(console.log).catch(console.log);

        
          
require 'mercadopago'
sdk = Mercadopago::SDK.new('<ENV_ACCESS_TOKEN>')
payment_request = {
  token: '<CARD_TOKEN>',
  installments: <INSTALLLMENTS_NUMBER>,
  transaction_amount: <TRANSACTION_AMOUNT>,
  description: '<DESCRIPTION>',
  payer: {
    email: '<BUYER_EMAIL>',
  },
  three_d_secure_mode: 'optional'
}
payment_response = sdk.payment.create(payment_request)
payment = payment_response[:response]

        
          
import mercadopago
sdk = mercadopago.SDK("<ENV_ACCESS_TOKEN>")
payment_data = {
    "transaction_amount": <TRANSACTION_AMOUNT>,
    "token": "<CARD_TOKEN>",
    "description": "<DESCRIPTION>",
    "installments": <INSTALLLMENTS_NUMBER>,
    "payer": {
        "email": "<BUYER_EMAIL>",
    },
    "three_d_secure_mode": "optional"
}
payment_response = sdk.payment().create(payment_data)
payment = payment_response["response"]

        
          
package main

import (
	"context"
	"fmt"

	"github.com/mercadopago/sdk-go/pkg/config"
	"github.com/mercadopago/sdk-go/pkg/payment"
)

func main() {
	accessToken := "<ENV_ACCESS_TOKEN>"

	cfg, err := config.New(accessToken)
	if err != nil {
		fmt.Println(err)
		return
	}

	client := payment.NewClient(cfg)

	request := payment.Request{
		TransactionAmount:<TRANSACTION_AMOUNT>,
		Payer: &payment.PayerRequest{
			Email: "<BUYER_EMAIL>",
		},
		Token:        "<CARD_TOKEN>",
		Installments: <INSTALLLMENTS_NUMBER>,
		Description: "<DESCRIPTION>",
		ThreeDSecureMode: "optional",
	}

	resource, err := client.Create(context.Background(), request)
	if err != nil {
		fmt.Println(err)
		return
	}

	fmt.Println(resource)
}

        
          
curl --location --request POST 'https://api.mercadopago.com/v1/payments' \
--header 'Authorization: <ENV_ACCESS_TOKEN>' \
--header 'Content-Type: application/json' \
--data-raw '{
    "payer": {
        "email": "<BUYER_EMAIL>"
    },
    "additional_info": {
        "items": [
            {
                "quantity": <ITEM_QUANTITY>,
                "category_id": <CATEGORY_ID>,
                "title": <ITEM_TITLE>,
                "unit_price": <TRANSACTION_AMOUNT>
            }
        ]
    },
    "payment_method_id": <PAYMENT_METHOD_ID>,
    "marketplace": "NONE",
    "installments": <INSTALLLMENTS_NUMBER>,
    "transaction_amount": <TRANSACTION_AMOUNT>,
    "description": "<DESCRIPTION>",
    "token": "CARD_TOKEN",
    "three_d_secure_mode": "optional",
    "capture": true,
    "binary_mode": false
}'

        

If the Challenge flow is not required, the payment status field will have a value of approved and it will not be necessary to display it, so it is possible to proceed with the application flow.

For cases where the Challenge is necessary, the status will show the value pending, and the status_detail will be pending_challenge.

Important
In the latter case, the response will show a payment attribute called three_ds_info with the fields external_resource_url, which contains the Challenge URL, and creq, a Challenge request identifier. It will be necessary to display the Challenge and treat its result with the following steps.

Response overview (information omitted)

When the Challenge is initiated, the user has about 5 minutes to complete it. If it is not completed, the bank will decline the transaction and Mercado Pago will consider the payment cancelled. While the user doesn't complete the Challenge, the payment will remain as pending_challenge.

          
{
    "id": 52044997115,
    ...
    "status": "pending",
    "status_detail": "pending_challenge",
    ...
    "three_ds_info":
    {
        "external_resource_url": "https://acs-public.tp.mastercard.com/api/v1/browser_Challenges",
        "creq": "eyJ0aHJlZURTU2VydmVyVHJhbnNJRCI6ImJmYTVhZjI0LTliMzAtNGY1Yi05MzQwLWJkZTc1ZjExMGM1MCIsImFjc1RyYW5zSUQiOiI3MDAwYTI2YS1jYWQ1LTQ2NjQtOTM0OC01YmRlZjUwM2JlOWYiLCJjaGFsbGVuZ2VXaW5kb3dTaXplIjoiMDQiLCJtZXNzYWdlVHlwZSI6IkNSZXEiLCJtZXNzYWdlVmVyc2lvbiI6IjIuMS4wIn0"
    },
    "owner": null
}


        
  1. For a better view of the 3DS Challenge in a responsive way, you should add the CSS below.

css

  #myframe{
    width: 500px;
    height: 600px;
    border: none;
  }
  @media only screen and (width <= 980px) {
    #myframe{
      width: 100%;
      height: 440px;
    }
  }
  1. To display the Challenge, you need to generate an iframe containing a form with method post, action containing the URL obtained in the field external_resource_url, and a hidden input with the value returned in creq. Then, you must post the form below to start the Challenge.
          
function doChallenge(payment) {
  try {
    const {
      status,
      status_detail,
      three_ds_info: { creq, external_resource_url },
    } = payment;
    if (status === "pending" && status_detail === "pending_challenge") {
      var iframe = document.createElement("iframe");
      iframe.name = "myframe";
      iframe.id = "myframe";
      document.body.appendChild(iframe);

      var idocument = iframe.contentWindow.document;

      var myform = idocument.createElement("form");
      myform.name = "myform";
      myform.setAttribute("target", "myframe");
      myform.setAttribute("method", "post");
      myform.setAttribute("action", external_resource_url);

      var hiddenField = idocument.createElement("input");
      hiddenField.setAttribute("type", "hidden");
      hiddenField.setAttribute("name", "creq");
      hiddenField.setAttribute("value", creq);
      myform.appendChild(hiddenField);
      iframe.appendChild(myform);

      myform.submit();
    }
  } catch (error) {
    console.log(error);
    alert("Error doing challenge, try again later.");
  }
}


        

When the Challenge is completed, the payment status will be updated to approved if the authentication is successful, and rejected if it is not. In situations where authentication is not performed, the payment remains pending. This update is not immediate and may take a few moments.

See the section below for more details on how to check the status of each transaction.

Check the status of the transaction

To find out the result of each transaction, there are three options:

  • Notifications: A notification of the payment status change will be received through Webhooks and the buyer must be redirected to a screen indicating that the transaction was successful. Check the Webhooks section and learn how to set it up.
  • Payments API: It will be necessary to make a Payments pooling and if the status changes, redirect the buyer to a confirmation screen.
  • Treat the iframe event (recommended): Keep in mind that the event only indicates that the Challenge has ended and not that the payment has reached a final status, as the update is not immediate and may take a few moments. Make a request to Payments and if the status changes, redirect the buyer to a screen indicating that the transaction was successful.

To treat the iframe event, follow the steps below.

Perform implementation

Use the following JavaScript code to implement and request the event that indicates that the Challenge has ended, so it is possible to redirect the client to the confirmation screen.

          
window.addEventListener("message", (e) => {
     if (e.data.status === "COMPLETE") {
         window.open("congrats.html");
     }
});


        

Search payment status

The following Javascript indicates how to search for the updated payment status and display it on the confirmation screen.

          
document.addEventListener("DOMContentLoaded", async function (e) {
 heat();
});

async function init() {
 const id = localStorage.getItem("paymentId");

 try {
   const response = await fetch("/get_payment/" + id, {
     method: "GET",
   });
   const result = await response.json();
   if (result.status != 200) throw new Error("error getting payment");
   document.getElementById("congrats-div").innerHTML =
     "Pagamento " + result.data.id + " -> Status: " + result.data.status;
 } catch (error) {
   alert("Unexpected error\n" + JSON.stringify(error));
 }
}


        
Important
If the payment is still pending after the Challenge timeout, it will be necessary to redirect the buyer to a screen informing that the payment has expired and that a new one needs to be created (the update is not immediate, it may take some moments).

After following these steps, your integration is ready to authenticate transactions with 3DS.

Possible payment statuses

A transaction with 3DS can return different statuses depending on the type of authentication performed (with or without Challenge). In a payment without Challenge, the transaction status will be directly approved or rejected.

In a payment with Challenge, the transaction will have a pending status and the authentication process with the bank will be initiated. Only after this step, the final status will be displayed.

See below the table with the possible statuses and their respective descriptions.

StatusStatus_detailDescription
"approved""accredited"Transaction approved without authentication.
"rejected"-Transaction rejected without authentication. To check the reasons, please refer to the standard list of status details.
"pending""pending_challenge"Transaction pending authentication or Challenge timeout.
"rejected""cc_rejected_3ds_challenge"Transaction rejected due to Challenge failure.
"rejected""cc_rejected_3ds_mandatory"Transaction rejected for not complying with 3DS validation when it is mandatory.
"cancelled""expired"Transaction with Challenge canceled after 24 hours in pending status.

Integration test

To facilitate the validation of 3DS payments, we have created a sandbox testing environment. This environment returns fictional results that are only used for simulating and validating the implementation.

Important
To test the integration, it is necessary to use your test credentials. Also, make sure to include the three_d_secure_mode attribute, setting it as optional or mandatory, to ensure the correct implementation of the 3DS payment.

To test payments in a sandbox environment, specific cards should be used to test the implementation of the Challenge with both success and failure flows, as shown in the table below:

CardFlowNumberSecurity CodeExpiration Date
MastercardSuccessful Challenge5483 9281 6457 462312311/25
MastercardUnauthorized Challenge5361 9568 0611 755712311/25
Matercard3ds mandatory5031 7557 3453 060412311/25

The steps to create the payment remain the same. If you have any doubts about how to create card payments, please refer to the documentation on Cards.

          
<?php
  use MercadoPago\Client\Payment\PaymentClient;
  use MercadoPago\MercadoPagoConfig;
  MercadoPagoConfig::setAccessToken("YOUR_ACCESS_TOKEN");

  $client = new PaymentClient();
  $request_options = new RequestOptions();
  $request_options->setCustomHeaders(["X-Idempotency-Key: <SOME_UNIQUE_VALUE>"]);

  $payment = $client->create([
    "transaction_amount" => (float) $_POST['transactionAmount'],
    "token" => $_POST['token'],
    "description" => $_POST['description'],
    "installments" => $_POST['installments'],
    "payment_method_id" => $_POST['paymentMethodId'],
    "issuer_id" => $_POST['issuer'],
    "payer" => [
      "email" => $_POST['email'],
      "identification" => [
        "type" => $_POST['identificationType'],
        "number" => $_POST['number']
      ]
    ],
    "three_d_secure_mode" => "optional"
  ], $request_options);
  echo implode($payment);
?>

        
          
import { MercadoPagoConfig, Payment } from 'mercadopago';

const client = new MercadoPagoConfig({ accessToken: 'YOUR_ACCESS_TOKEN' });
const payment = new Payment(client);

const body = {
transaction_amount: req.transaction_amount,
  token: req.token,
  description: req.description,
  installments: req.installments,
  payment_method_id: req.paymentMethodId,
  issuer_id: req.issuer,
  payer: {
    email: req.email,
    identification: {
      type: req.identificationType,
      number: req.number
    }
  },
  three_d_secure_mode: 'optional' 
};

payment.create({ body: body, requestOptions: { idempotencyKey: '<SOME_UNIQUE_VALUE>' } }).then(console.log).catch(console.log);

        
          
PaymentClient client = new PaymentClient();

PaymentCreateRequest paymentCreateRequest =
   PaymentCreateRequest.builder()
       .transactionAmount(request.getTransactionAmount())
       .token(request.getToken())
       .description(request.getDescription())
       .installments(request.getInstallments())
       .paymentMethodId(request.getPaymentMethodId())
       .payer(
           PaymentPayerRequest.builder()
               .email(request.getPayer().getEmail())
               .firstName(request.getPayer().getFirstName())
               .identification(
                   IdentificationRequest.builder()
                       .type(request.getPayer().getIdentification().getType())
                       .number(request.getPayer().getIdentification().getNumber())
                       .build())
               .build())
       .threeDSecureMode("optional")
       .build();

client.create(paymentCreateRequest);

        
          
require 'mercadopago'
sdk = Mercadopago::SDK.new('YOUR_ACCESS_TOKEN')
 
payment_data = {
 transaction_amount: params[:transactionAmount].to_f,
 token: params[:token],
 description: params[:description],
 installments: params[:installments].to_i,
 payment_method_id: params[:paymentMethodId],
 payer: {
   email: params[:email],
   identification: {
     type: params[:identificationType],
     number: params[:identificationNumber]
   }
 three_d_secure_mode: "optional",
 }
}
 
payment_response = sdk.payment.create(payment_data)
payment = payment_response[:response]
 
puts payment

        
          
using System;
using MercadoPago.Client.Common;
using MercadoPago.Client.Payment;
using MercadoPago.Config;
using MercadoPago.Resource.Payment;
 
MercadoPagoConfig.AccessToken = "YOUR_ACCESS_TOKEN";
 
var paymentRequest = new PaymentCreateRequest
{
   TransactionAmount = decimal.Parse(Request["transactionAmount"]),
   Token = Request["token"],
   Description = Request["description"],
   Installments = int.Parse(Request["installments"]),
   PaymentMethodId = Request["paymentMethodId"],
   Payer = new PaymentPayerRequest
   {
       Email = Request["email"],
       Identification = new IdentificationRequest
       {
           Type = Request["identificationType"],
           Number = Request["identificationNumber"],
       },
   },
ThreeDSecureMode = "optional",
};
 
var client = new PaymentClient();
Payment payment = await client.CreateAsync(paymentRequest);
 
Console.WriteLine(payment.Status);

        
          
import mercadopago
sdk = mercadopago.SDK("ACCESS_TOKEN")
 
payment_data = {
   "transaction_amount": float(request.POST.get("transaction_amount")),
   "token": request.POST.get("token"),
   "description": request.POST.get("description"),
   "installments": int(request.POST.get("installments")),
   "payment_method_id": request.POST.get("payment_method_id"),
   "payer": {
       "email": request.POST.get("email"),
       "identification": {
           "type": request.POST.get("type"), 
           "number": request.POST.get("number")
       }
   }
   "three_d_secure_mode": "optional"
}
 
payment_response = sdk.payment().create(payment_data)
payment = payment_response["response"]
 
print(payment)

        
          
package main

import (
	"context"
	"fmt"

	"github.com/mercadopago/sdk-go/pkg/config"
	"github.com/mercadopago/sdk-go/pkg/payment"
)

func processPayment(r *http.Request) {
	accessToken := "{{ACCESS_TOKEN}}"

	cfg, err := config.New(accessToken)
	if err != nil {
		fmt.Println(err)
		return
	}

	client := payment.NewClient(cfg)

	request := payment.Request{
		TransactionAmount: r.FormValue("transactionAmount"),
		Token: r.FormValue("token"),
            Description: r.FormValue("description"),
		PaymentMethodID:   r.FormValue("paymentMethodId"),
		Payer: &payment.PayerRequest{
			Email: r.FormValue("email"),
			Identification: &payment.IdentificationRequest{
				Type: r.FormValue("type"),
				Number: r.FormValue("number"),
			},
		},
	}

	resource, err := client.Create(context.Background(), request)
	if err != nil {
		fmt.Println(err)
	}

	fmt.Println(resource)
}

        
          
curl -X POST \
   -H 'accept: application/json' \
   -H 'content-type: application/json' \
   -H 'Authorization: Bearer YOUR_ACCESS_TOKEN' \
   'https://api.mercadopago.com/v1/payments' \
   -d '{
         "transaction_amount": 100,
         "token": "CARD_TOKEN",
         "description": "Blue shirt",
         "installments": 1,
         "payment_method_id": "master",
         "issuer_id": 310,
         "payer": {
           "email": "PAYER_EMAIL"
         },
         "three_d_secure_mode": "optional"
   }'

        

Challenge

In both the success and failure flows, the Challenge, which is a screen similar to the one shown below, should be displayed within the iframe:

Challenge

The provided verification code is for illustrative purposes only. To complete the test flow, simply click the Confirm button. After completing this action, follow the detailed instructions in the Check the status of the transaction section to determine when the Challenge has been completed and how to check for payment updates.